How to make graphite processing equipment to provide efficiency, is a lot of enterprises care about the details, this is now a simple detailed introduction. All kinds of square or rectangular section of graphite anode plate at both ends of the general use circular saw tangent. In order to improve the processing efficiency, it is processed on the special equipment with circular saw blades (each one of the ends) and conveying device. Need six surface graphite processing anode can be used for general processing of wood double-sided planer or double-sided milling machine, but also the simple structure of the four-sided milling machine to complete the processing. Many electrolysis plants have this kind of equipment.
All kinds of graphite processing commonly used planer and special double end milling machine. When graphite processing carbon block plane, the efficiency of double end milling machine is higher than that of planer, but the planer can also be used for cutting graphite block in addition to the plane, but the milling machine can’t cut the graphite block. Because the BF graphite block has up to three meters, the stroke of the planer should be suitable to the graphite processing specifications. The section size of the graphite block is generally $number x 400 mm, so the milling cutter disk diameter of the double end milling machine should be greater than 400 mm. The two-end face milling has two milling heads and can process two planes at the same time. The trapezoidal plane of graphite processing trapezoidal graphite block can only be used single milling head one-sided operation.